F2300 Firmware Upgrade 36.128L.05

Actiontec does not maintain/provide firmware upgrades for devices supplied by an Internet Service Provider.

Contact your ISP for firmware upgrades for devices supplied by the ISP.


NOTES:

This upgrade will restore your device to factory defaults, erasing all user names, passwords, wireless settings and advanced custom configurations that you have made. Be sure to make note of any custom settings before upgrading your unit.

Mac users using Safari may need to disable the 'Open 'safe' files after downloading' option before downloading this file.

Actiontec Electronics will not provide a refund or replacement, for products that have failed due to the loading of incorrect firmware or the testing of custom firmware.

(To identify your Actiontec product, look for the model number. It is located on the FCC sticker, found on the bottom or back of the product. Typically the model number is in the sticker's upper right-hand corner.)

This Firmware Upgrade (36.128L.05) is for the F2300 ONLY. It is not to be used on any other model of router or gateway. This is an NCS (Non-Customer Specific) Firmware and is not intended as an Upgrade for ANY ISP Specific Firmware, regardless of version number. Therefore, you should not load an NCS Firmware Upgrade on to a gateway that currently has an ISP Specific Firmware installed. The reverse is also true. You should not load an ISP Specific Firmware Upgrade on to a gateway that currently has an NCS version installed. These types of Upgrades frequently result in a nonfunctional device.

Clicking the link will initiate the download, and at the prompt 'Do you want to run or save this file?' select 'Save'. At the following 'Save As' dialog, be sure to select a familiar location to save the file, like 'My Documents' or the 'Desktop', so that the file will be easy to find later.

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.