What do the colors of the LED indicate?

Power

  1. Green - Power has been applied to the device
  2. Off - Device has no power or is Off

Speed

  1. Green - When the device has joined the MoCA RF network and has a PHY rate ≥ 225 Mbps with all nodes in the network
  2. Yellow - when the device has joined the MoCA RF network and has a PHY rate ≥ 150 and <225 Mbps with all nodes in the network
  3. Flashing Yellow - When the device is searching to join the MoCA RF network

Coax

  1. Green - The device has formed a network over the coax cable with at least one other ECB
  2. Flashing Green - when the device is either searching for the network or passing traffic

Ethernet

  1. Green - The device is successfully connected to an Ethernet device on the specific port. If the LED is blinking, the device is actively sending or receiving data over that port
  2. Off - There is not a valid Ethernet connection
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.